Leyline speaker cable Chord Cable >SPK
| 사용설명서
드라이버 |
|
Leyline speaker cable (LS0H)
Chord Leyline 스피커 케이블은 막 가정용 홈 씨어터 붐이 시작될 때 등장했습니다. 보통 A/V 앰프는 한 곳에 설치됩니다. 이것은 건물 전체에 긴 (때로는 매우 긴) 스피커 케이블이 필요하다는 것을 의미했습니다. 그것은 또한 케이블이 가늘고 저렴해야 한다는 것을 의미했습니다. 시중에 이미 값싼 케이블이 많이 있었기 때문에 더 나은 무언가를 개발해야 했습니다. 굵기는 16AWG 도체 사용에 한정하였습니다. 길이가 긴 점은 꼬인 쌍 디자인을 사용해야 합니다. 어쨌든 스피커 케이블을 만들기 위해 이미 꼬임 쌍 구조를 사용했기 때문에 문제가 안되었습니다. 비용을 감안하여 은(銀) 도금이나 PTFE를 사용하지 않고 무산소 구리 도체에 저밀도 폴리에틸렌 단열재를 도체를 적용했습니다.
문제는 케이블이 길어 짐에 따라 고역대의 디테일이 손실되고 공간감 및 일관성이 저하되었습니다. 우리는 이 문제를 구리 도체를 주석으로 도금하여 해결했습니다. 그렇게 함으로서 지나치게 밝지 않았고, 길게 사용해도 고역대의 디테일을 전달할 수 있습니다. Leyline의 최종 버전은 주석으로 도금된 무산소 구리 도체에 저밀도 HDPE 절연, 꼬인 컨덕터 구성 및 LS0H 보호 외장재 (저 연기, 제로 할로겐)를 특징으로 했으며, 이에 따라 공공 건물에서도 Leyline을 사용할 수 있습니다.
Leyline은 대형 홈씨어터 시스템의 리어 스피커에도 탁월한 선택입니다. 프론트 스피커에 어떤 스피커 케이블을 선택하더라도 전반적인 밸런스를 잃지 않고 사용할 수 있는 케이블입니다.
Chord Leyline speaker cable came into being during the first wave of home A/V set-ups. Amplifiers for all rooms were often fitted in one place. This meant long (and sometimes very long) runs of speaker cable throughout the structure. It also meant that the cable had to be discrete and affordable. There were already a lot of cheap cables available, so we needed to develop something better. Size restrictions meant using 16AWG conductors. Long runs meant using a twisted pair design – which suited us as we already using twisted pair geometry to produce speaker cables anyway. Cost ruled out silver-plating or using PTFE, so after much thought we settled on oxygen free copper conductors and low-density polyethylene insulation for conductors.
The problem came with longer runs and a loss of high frequency detail along with space and coherence. We solved this by tin-plating the conductors. It wasn’t an overly bright cable and would now carry high frequency detail over longer runs. The final version of Leyline featured tin-plated oxygen free copper conductors, low density HDPE insulation, a twisted pair conductor configuration and a protective LS0H outer jacket (low smoke, zero halogen), meaning Leyline can be used in public buildings.
Leyline is also a great choice for rear speakers in bigger systems. It can be used with pretty much whatever level of speaker cable you choose for the front speakers, with no loss of overall balance.
Technical Specifications
Conductor
|
Tinned Stranded Oxygen Free Copper
|
Insulation
|
HD-PE
|
Configuration
|
Twisted pair
|
Shielding
|
None. Low smoke, zero halogen, outer jacket
|
AWG
|
16AWG*1P, 19/29AWG
|
mm2
|
1.31
|
Diameter
|
6mm
|
|
hits : 2038